Skip to content

Free shipping on US orders over $500

Cart

Safety and security film · Home and office

XPEL VISION Safety & Security

Current Status checked September 2026

Safety and security films, clear or combined with solar control, from 4 to 14 mil. Listed on XPEL's VISION spec sheet (R0824V2).

Technology
Security laminate
Made for
Home and office
Darkness range
15% to 89% VLT

Full specs

Source: XPEL VISION specification sheet (R0824V2) (opens in a new tab). Our archived copy (PDF) (opens in a new tab).

XPEL VISION Safety & Security shades and performance
ShadeVisible light transmitted Visible light transmitted. Share of visible light that passes through the glass and film. Lower is darker. Visible light reflected, outside Visible light reflected, outside. Share of light the window reflects outward: how mirror-like it looks from outside. Visible light reflected, inside Visible light reflected, inside. Share of light reflected back into the car or room: how much you see your own reflection at night. Total solar energy rejected Total solar energy rejected. Share of the sun's total energy (heat) kept out. Higher is cooler. Infrared energy rejected Infrared energy rejected. Share of infrared energy blocked across the whole infrared range. Selective infrared rejected Selective infrared rejected. Infrared blocked at the wavelengths the maker picks. It reads higher than IRER and differs from brand to brand, so compare it only within one brand. Ultraviolet blocked Ultraviolet blocked. Share of ultraviolet light blocked, the part that fades interiors and harms skin. Solar energy transmitted Solar energy transmitted. Share of the sun's energy that passes straight through the glass. Solar energy reflected Solar energy reflected. Share of the sun's energy reflected back outside. Glare reduction Glare reduction. How much less visible glare than the same glass with no film. Solar heat gain coefficient (g-value) Solar heat gain coefficient (g-value). Fraction of the sun's heat that ends up inside, from 0 to 1. Lower is cooler. Shading coefficient Shading coefficient. Solar heat gain compared with plain 1/8-inch clear glass, from 0 to 1. Lower is cooler.
Security Clear 8mil 89%9%9%18%––99%79%8%1%0.820.94
Security Clear 4mil 89%9%9%17%––99%80%8%0%0.830.95
Exterior Security Clear 7mil 88%8%8%19%23%32%99%76%7%1%0.810.93
Security Clear 14mil 88%9%9%19%––99%78%9%2%0.810.93
Security 8 mil Clear View Plus 70 73%9%9%51%76%94%99%40%26%20%0.490.56
Security 8mil Neutral 50 55%12%12%41%45%48%99%45%12%51%0.590.68
Security 8mil Neutral 35 38%16%13%50%49%58%99%39%13%58%0.50.57
Security 8mil Silver 15 15%56%56%79%81%92%99%12%51%84%0.210.24
What the column names mean
VLT
Visible light transmitted. Share of visible light that passes through the glass and film. Lower is darker.
VLR out
Visible light reflected, outside. Share of light the window reflects outward: how mirror-like it looks from outside.
VLR in
Visible light reflected, inside. Share of light reflected back into the car or room: how much you see your own reflection at night.
TSER
Total solar energy rejected. Share of the sun's total energy (heat) kept out. Higher is cooler.
IRER
Infrared energy rejected. Share of infrared energy blocked across the whole infrared range.
Sel. IRR
Selective infrared rejected. Infrared blocked at the wavelengths the maker picks. It reads higher than IRER and differs from brand to brand, so compare it only within one brand.
UV
Ultraviolet blocked. Share of ultraviolet light blocked, the part that fades interiors and harms skin.
SET
Solar energy transmitted. Share of the sun's energy that passes straight through the glass.
SER
Solar energy reflected. Share of the sun's energy reflected back outside.
Glare
Glare reduction. How much less visible glare than the same glass with no film.
SHGC
Solar heat gain coefficient (g-value). Fraction of the sun's heat that ends up inside, from 0 to 1. Lower is cooler.
SC
Shading coefficient. Solar heat gain compared with plain 1/8-inch clear glass, from 0 to 1. Lower is cooler.

Figures are measured on single-pane clear glass; results on your windows will vary. The number in a shade's name is nominal; VLT is the measured light transmission.

Visualize the shades: tint preview and heat rejected

The tint preview shows how each shade darkens the view from inside (visible light transmission, VLT); screens vary, so use it as a guide. Heat rejected is total solar energy rejected (TSER): higher is cooler.

Similar films from other brands

Current security laminate and closely related films for homes and offices from other makers, to compare side by side. Films we sell are listed first.

Similar films from other brands
FilmTypeVLTTSERAt TintCenter
Crystal GuardASWFSecurity laminate85–89% 16–19%
Solar SafetyASWFSecurity laminate14–71% 40–82%
Safeguard SeriesCosmo SunshieldSecurity laminate88–90% 11–49%
SKYLINE SAFEHEXISSecurity laminate85–90% 16–20%
Armorcoat Clear SafetySolar GardSecurity laminate86–88% 21–22%
Armorcoat Solar SafetySolar GardSecurity laminate12–46% 45–77%

VLT: darkness range (light let through). TSER: heat rejected, lightest to darkest shade. Makers measure differently, so treat close figures as a tie. Browse all brands and films.

Similar films you can buy here

We don't sell XPEL VISION Safety & Security. These films in our store are the closest match by type:

More from XPEL

See all 16 current XPEL films

Spot a mistake or know what happened to this line? Tell us and we'll update the record.

TintCenter is independent: no maker pays to appear or be ranked here. We also sell film by the roll, and store links are marked "Shop". How we research and make money.