Solar Gard Bronze
Blocks 99% of UV and 70–78% of the sun's heat, depending on the shade.
$2.20 per sq ft · $6.60 per foot of a 36" roll
Performance by shade
| Shade | Light through (VLT) | Reflected (VLR) | UV blocked | Heat out (TSER) | Glare cut | SHGC |
|---|---|---|---|---|---|---|
| 35 - Light | 35% | 27% | 99% | 70% | 61% | 0.3 |
| 20 - Medium | 22% | 36% | 99% | 78% | 76% | 0.22 |
Manufacturer data. SHGC is the share of the sun's heat that gets through, as a fraction (lower is cooler).
Questions about this film or roll size? Call toll-free (no charge) 1-833-593-4366.
Solar Gard Solar Bronze adds a warm copper finish to windows that suits natural, earth-toned exteriors. It rejects a lot of heat and gives good daytime privacy while still letting in natural light.
- Warm copper-bronze finish
- Up to 78% of solar heat rejected (20 shade)
- Two shades, 36" to 60" wide
At a glance
- 2 shades (35, 20): measured visible light 22% to 35%
- UV blocked: 99%
- Total solar energy rejected: 70% to 78%
- Glare reduction: 61% to 76%
- Widths: 60", 48", 36"
- Roll lengths: 10, 25, 50, 100 ft
- Full specifications for each shade are in Performance by shade.
Roll sizes: 36" and 48" wide come in 10, 25, 50 and 100 ft rolls. 60" wide comes in 25, 50 and 100 ft rolls only.
Solar Gard approves Solar Bronze 35 and 20 for double-pane and Low-E #2 glass, up to 40 sq ft per insulated unit. On Low-E #3 the approval needs a window SHGC of 0.61 or less; otherwise Solar Gard reviews the job first. See the double-pane and Low-E guide.
Warranty: Limited lifetime warranty including fading.
Couldn't load pickup availability

